Introdução
Ferramentas
Peças
-
-
Apply a bead of new thermal paste to the center of the processor's copper heat spreader, roughly the size of a pea.
-
-
-
Set the heat sink's aluminum fins into its recess behind the fan, then lower the heat sink onto the board.
-
-
-
Use a JIS 00 driver to partially install the four 3.4 mm‑long silver screws securing the heat sink.
-
Tighten the screws in an X pattern. For example: bottom left, top right, bottom right, then top left.
-
Conclusão
To reassemble your device, follow these instructions in reverse order.
