Nintendo Switch 2 Heat Pipe Cleaning

Escrito Por: Nick Schultz
  • Comentários: 0
Nintendo Switch 2 Heat Pipe Cleaning

Dificuldade

Moderate

Passos

1

Tempo necessário

No estimate

Introdução

  1. Ux1iIrOdeVG5efPg
    Ux1iIrOdeVG5efPg
    6HF6QJGDRJOQoMww
    QoAr3hmI5NybUc11

    • If you don't have replacement thermal putty, use the flat end of a spudger to distribute the old putty evenly across the heat pipe, as thick as possible to ensure proper contact. Repeat this process on the shield plate, then skip this step.

    • Use the flat end of a spudger to scrape off the thermal putty on top of the copper heat pipe.

    • Apply high-concentration (90% or higher) isopropyl alcohol or thermal material remover to a cotton swab or lint-free cloth and wipe away any remaining thermal putty on both the heat pipe and shield plate.

    • Don't use a paper towel or rag, as they may scratch the shield plate.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

Nick Schultz

Membro desde: 24/03/24

45909 Reputação

0 comentários