NETGEAR WGT624 v3 Motherboard Replacement

Escrito Por: Corey Worthington
  • Comentários: 0
NETGEAR WGT624 v3 Motherboard Replacement

Dificuldade

Moderate

Passos

6

Tempo necessário

30 minutes

Introdução

Removing the motherboard will allow you to replace it, or give you access to the other components that are attached to it.

  1. V6qAE3xo3ETcsUPt

    • Turn the device so that the bottom is facing up.

  2. HfLKlfn1POushN5C
    HfLKlfn1POushN5C
    T1rdEJuU51M4xIcp
    xRxFBxwNoyTOTkyE

    • Use the plastic opening tool to carefully lift the rubber stops in each corner.

    • Do not completely remove the rubber stops, because they are difficult to replace.

  3. X5cBjW2YyNFv1tGI
    X5cBjW2YyNFv1tGI
    5u4cfJdemplNBtJx

    • Unscrew the 4 11.8 mm T-8 Torx screws from each corner of the device.

  4. WQMOmqQGAwLrFm4X
    WQMOmqQGAwLrFm4X
    VIHvuhBSJh4wwXSl

    • Lift the lower case straight up from the rest of the router.

  5. XsWUcfGOXxeAuJWV
    XsWUcfGOXxeAuJWV
    MjXFBtnDHAOIjeGJ

    • Remove the clear plastic casing by lifting it straight up from the router.

  6. hEpVMWvM2COMejTi
    hEpVMWvM2COMejTi
    pLXdfUslHSgU1Pn4

    • Separate the motherboard from the top shell by lifting it straight up from the router.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

Corey Worthington

Membro desde: 24/01/13

50 Reputação

0 comentários