Introdução
Rapid, easy solution to a Mr. Christmas Music Box with rotating dancers display that is not working.
# Remove the bottom Phillips screws, The 2 inch diameter rubber drive belt is likely broken.
- 2. Get a #32 plain office rubber band, same diameter, and place it over the pulley wheels. Check to see if this works. If it does, it may not last, so purchase, on eBay, the square profile bands of that diameter for a far lower cost than anything advertised as a Mr. Christmas fix.
- If it does not work, check for a broken gear. There are innovative repair guides on YouTube using Ca glue and baking powder, etc.
- If it's not a gear, see if the motor is working. if not, follow the repair links at Mr. Christmas for a motor kit.
-
-
This size and diameter of elastic band really does work! But plan on getting the proper replacement, as this will not last long-term.
-
Conclusão
To reassemble your device, follow these instructions in reverse order.
