Moosoo XL-618A Motor Replacement

Escrito Por: Ashtyn Hansen
  • Comentários: 3
Moosoo XL-618A Motor Replacement

Dificuldade

Moderate

Passos

5

Tempo necessário

10 minutes

Introdução

If you are hearing any high-pitched noises or having any suction issues while using the floor brush attachment, you may have a loose motor connection to the floor brush. The motor in the floor brush attachment of the vacuum powers the floor brush and the suction. Here is a guide on how to replace the motor in the Moosoo XL-618A vacuum.

  1. sngfCOsKseYJqwgW

    • Remove the eight 11 mm screws on the bottom of the vacuum with the Phillips #1 screwdriver.

  2. qrnmcFxtuHghQFWJ
    qrnmcFxtuHghQFWJ
    LVXkfqrUMLUWTpAR
    YZtihrW6tSFVTeOb

    • Pull the two hard plastic covers off of the floor brush piece.

  3. tT3A6DPwrLMHb3Nb

    • Remove the 9 mm screw to the motor with the Phillips #1 screwdriver.

  4. UhVU14AXGvRbColg
    UhVU14AXGvRbColg
    rEgNCKJNraB6vnef
    4EGFd5FFa3VWZTUN

    • Take the motor and floor brush out of their slot and pull the floor brush off of the motor.

    • This is the perfect opportunity to clean the brush as well.

  5. mPbUrbHCLuGltmHa
    mPbUrbHCLuGltmHa
    IQTHRCTghUZIWYKx
    SlFm2COTQqanLjtv

    • Remove the two 9 mm screws with the Phillips #1 screwdriver and pull the plastic piece off of the motor.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

Ashtyn Hansen

Membro desde: 20/09/23

507 Reputação

3 comentários

Thank you what a huge help you've been plus I believe you saved me money because I was at the point of giving up until I found this. Bless you, and Happy Holidays to you and your family. Cheers! Sincerely

, Duke G.

Duke Gibo -

Where do I get the motor? HLRS355PA-15146 class 120? Moosoo model 618Pro

Boyd Guard -

Model XL 618pro

Boyd Guard -