Introdução
Does your Milwaukee Hole Hawg have sparks coming from the motor during use? If so, the motor brushes could be worn and in need of replacement. Here is a link to the Milwaukee Hole Hawg 1675-1 Troubleshooting Page. The carbon brushes conduct electricity to the armature through contact with the spinning commutator. Over time the brushes will wear down and cause sparking which is a sign they need to be replaced. All you will need is a standard #4 Flat Screwdriver head to remove the brush cap and the brush itself.
Ferramentas
-
-
Pry up on the copper brush holder with a screwdriver or spudger.
-
Continue lifting up the copper brush holder to remove the brush.
-
Repeat on the opposite side.
-
To reassemble your device, follow these instructions in reverse order.
3 comentários
Donde los puedo comprar???
Me puedes dar los datos de los carbones que lleva este taladro
Alguien que me pueda ayudar para pedir los carbones de éste modelo de taladro
Donde puedo comprar los carbones???
Arturo Lopez -