Meepo Mini 5 Truck Bushing Replacement

Escrito Por: Richard
  • Comentários: 0
Meepo Mini 5 Truck Bushing Replacement

Dificuldade

Moderate

Passos

12

Tempo necessário

20 minutes

Introdução

Truck bushing affects the sensitivity of your skateboard turns and on road stability. Bushings wear down over time and need replacements. In this tutorial, we will replace the truck bushing on a Meepo Mini 5 electric skateboard.

  1. WR34MlpiAwntZudk
    WR34MlpiAwntZudk
    AUX5UaNsrZ3ENQeU

    • Rotate the half-inch wrench counter-clockwise to loosen the bushing bolt.

  2. ADl5YWMZHM5Ys1BP
    ADl5YWMZHM5Ys1BP
    OtSbEhBu1aDUeaaQ

    • Take out the truck bushing (orange part).

  3. RYEAYTL1bpZkwBaV

    • Take the wheels out of the screw by pulling it toward you.

  4. hJPvOAe2OUNQJXFh

    • Remove the washer from the top of the bushing.

  5. lRWHuINfpAmGBdxj

    • Take out the bottom bushing (orange part).

  6. QFcMuYfVyZMHXaal

    • Take off the metal cap from the bushing.

  7. 2MfiMXgGtAP3KWAr

    • Replace with the new bushing to the cap.

  8. H45hqjypbY6OXJja

    • Press the bushing back.

  9. FBnBg3JEUqXJaAoJ
    FBnBg3JEUqXJaAoJ
    I4uCGkphbYEsPQAE

    • Press the hanger back (wheels)

    • Press the wire and point the semicircular ridge to the hole at the same time as the space is narrow.

  10. jIQLZogbPWblV3qF

    • Press the upper bushing and the cap back on.

  11. BhwoXsfUyMQsnuwR

    • Press the pin back on.

  12. ZDjYHGFIR5gDCRvy

    • Rotate the 1/2 inch wrench clockwise to tighten the pin.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

Richard

Membro desde: 26/04/24

205 Reputação

0 comentários