Maylong MN-1000P Bottom Cover Replacement

Escrito Por: Kristen Gismondi
  • Comentários: 0
Maylong MN-1000P Bottom Cover Replacement

Dificuldade

Easy

Passos

5

Tempo necessário

5 - 10 minutes

Introdução

If you notice that the bottom cover of your Maylong MN-1000P laptop is broken, follow this guide to replace it. You may also need this guide to access the internal components of your device.

  1. EUqt4RYbg5RPeTr3

    • Place the netbook top down, with the opening of the netbook facing you.

  2. yxULNBHBpY3vBHPX

    • Remove the six 6mm Phillips #00 screws from the netbook.

  3. y3fuE1Hlf3VneHyr
    y3fuE1Hlf3VneHyr
    rkAZAu2FAQQNj3Bd
    2HieVGO21gBsPBHx

    • Remove the sticker in the middle of the netbook.

    • Remove the middle 6mm Phillips #00 screw.

  4. QVkMJMBv4B1hBJhB

    • Using two plastic opening tools, pry off the bottom of the netbook by going around the edges.

  5. BwS6XCkKLWQIBDCK

    • Remove the bottom of the netbook by lifting the corners.

Conclusão

To reassemble your device, follow these instructions in reverse order. Take your e-waste to an R2 or e-Stewards certified recycler.

Autor(a)

Kristen Gismondi

Membro desde: 12/11/14

103915 Reputação

0 comentários