Introdução

This guide will show you how to take apart and replace the locking hinge on a MACTREM tripod leg. while I am replacing a locking hinge, this guide shows how to replace and maintenance any piece of the leg.

  1. KYOGS4EXv2UiNGfB
    • Clean the leg that's damaged/needs maintenance.

  2. HHrrKmORpRPQRiNj
    HHrrKmORpRPQRiNj
    NwuI4HRMJPsqYvPH
    • Extend the part of the leg you will replace and/or clean.

  3. mBEqUTC1IHvQGYVy
    mBEqUTC1IHvQGYVy
    cXRnlvtpMubYgBI2
    • Use the center punch and hammer to tap the pin out of the locking mechanism hinge.

    • Remove the locking mechanism lever.

  4. 3rmAMEyXGJ12adyh
    3rmAMEyXGJ12adyh
    JoodSVoCYBNjaf3p
    • Remove the leg piece from the main body.

  5. o6AtddCPObOEUjLT
    o6AtddCPObOEUjLT
    J3pQb1WtOat6Uhu2
    • Use the center punch and hammer to tap the pin out of the locking hinge on the opposite side of the damaged leg.

    • Remove the lever from the locking mechanism.

  6. EBEjTlpCT2TbqZtt
    EBEjTlpCT2TbqZtt
    5DeXgOCfXuYykHOT
    • Slide the locking hinge off the broken leg.

    Is there a source for the locking hinge and the lower leg segment (~17 mm od)?

    Tom Wern -

Conclusão

To reassemble your device, follow these instructions in reverse order.

Joseph Brown

Membro desde: 02/10/25

163 Reputação

0 comentários