Introdução

Follow this guide to replace a worn-out or dead battery in your Logitech Signature Slim Solar+ keyboard.

It’s natural for batteries to lose capacity as they age. If your keyboard dies quickly and doesn't hold a charge, it may be time to replace the battery.

  1. ufTE5jqn4PhcADKB
    ufTE5jqn4PhcADKB
    RajDoTCLiHTaFL64
    • Slide the keyboard's power switch into the OFF position.

    • A red indicator should be visible beneath the switch.

    • Lay your keyboard down with the feet facing up on a clean work surface.

    • If your work surface may scratch the keyboard, place a soft towel under it.

  2. KEHgF6DtHUP3ADfu
    KEHgF6DtHUP3ADfu
    DAJ4MlrAcqSaSavM
    fYmhPiWaCUZqjfqh
    • Insert the point of a spudger under an end of the foot.

    • Push the spudger underneath the foot and lift until you can grip it with your fingers.

    • Peel the foot up and remove it. Keep it for reassembly.

  3. C5liDOQ5mqpyWEPJ
    C5liDOQ5mqpyWEPJ
    AWHIwc4xFDkjPXos
    REM3fHRyXDxT3tGY
    • Repeat the procedure to remove two remaining feet along the top edge. Keep these for reassembly.

  4. xJuHdVyFAvsLlZpE
    • Use a Phillips screwdriver to loosen the three captive screws securing the battery cover.

  5. vURxABVJxIawcsZU
    vURxABVJxIawcsZU
    VlBIRWdOvVci6OId
    VHHQSmOrD4tnLasK
    • Lift and remove the battery cover.

  6. wX2dNolDEHUSKvej
    wX2dNolDEHUSKvej
    2AIfjY21ayCcLxxS
    • Use your fingers or a spudger to lift and remove the battery by its side tabs.

  7. mQmJk2EYORFnQKlE
    mQmJk2EYORFnQKlE
    FXJ42TcIkrGtXMRm
    Snhut4xBlQIH1nb5
    • Align the battery with its recess and push down firmly with your finger to click it in place.

  8. ESn3whsCUxVkVkb6
    ESn3whsCUxVkVkb6
    rAGXmUJOxqrWnGSD
    • Lay the battery cover in place and gently press it onto the keyboard to engage the clips.

  9. iars5SCDuFYTpBRL
    • Use a Phillips screwdriver to tighten the three captive screws securing the battery cover.

  10. GUekWPSEVYdR56XB
    GUekWPSEVYdR56XB
    5XsjQqFmww5MKPsF
    PLNWmn6AIBulvwk3
    • If you're installing new feet, remove them from their backing and firmly press them into place.

    • If you're reusing the feet, use a strip of double-sided tape to secure them in their recesses.

Conclusão

Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.

Reuse or Recycle—Never put discarded electronic parts in household waste. Visit Logitech Recycling to find your nearest recycling points, including the option to mail back old devices to Logitech for free if there’s no convenient solution in your area. You can also take your e-waste to any R2 or e-Stewards certified recycler. And don’t let good working parts or repaired devices die a slow death in your sock drawer—pass them along to someone who can use them.

Share your experience—Leave a comment here or send your feedback directly to Logitech at repair@logitech.com to help shape future repair guides and product design.

Arthur Shi

Membro desde: 03/01/18

326111 Reputação

0 comentários