Logitech MX Master 4 Battery Replacement

Escrito Por: Spencer Day
  • Comentários: 0
Logitech MX Master 4 Battery Replacement

Dificuldade

Easy

Passos

7

Tempo necessário

10 - 20 minutes

Introdução

Follow this guide to replace a worn-out or dead battery in your Logitech MX Master 4 wireless mouse.

It’s natural for batteries to lose capacity as they age. If your mouse dies quickly and doesn't hold a charge, it may be time to replace the battery.

For safety, perform this repair when your battery is below 15% charge. Any charged lithium-ion battery can be hazardous if punctured or damaged. If your battery looks puffy or swollen, take appropriate precautions.

  1. LGOtBqe1BXxST4vO
    LGOtBqe1BXxST4vO
    drMde6PI2KVguG1O
    XOEJjjaLWfhECJVc

    • Flip the mouse's power switch down into the OFF position and unplug any cables.

    • The mouse's unique shape prevents it from laying flat. If you need to, lay it down on a soft towel to prevent wobble.

  2. XAslfNfByxrawogb
    XAslfNfByxrawogb
    YoIoZfoVknUnbJbY

    • Use a Phillips screwdriver to remove the six screws securing the two halves of the mouse together:

    • Five 4.3 mm‑long screws

    • One 6.3 mm‑long recessed screw

  3. LESQgJjg1MXBSTuk
    LESQgJjg1MXBSTuk
    VYGyWVXhYIwKwppQ
    FBy4B2SBJaPXkETP

    • Two strong, plastic clips still secure the front of the mouse.

    • Insert the flat end of a spudger in the seam between the two halves of the mouse, near the power switch.

    • Slide the spudger along the seam to the very front of the mouse.

    • Gently pry the bottom half of the mouse away from the top half, until you feel and hear the first clip release.

    • You should only have to pry a small amount. If the mouse doesn't unclip, remove the spudger and start over.

  4. KCBsMvGmFNVywP5N
    KCBsMvGmFNVywP5N
    5RXS6c2XngKeWCk4
    FxJXLoiBLKQYAilo

    • Don't try to fully separate the two halves yet—a ribbon cable still connects them.

    • Grip the top half of the mouse in one hand, and the bottom half in your other hand.

    • Slowly pull the back of the mouse apart until you feel the last clip on the front release.

    • During reassembly, firmly pinch the mouse together near the front to engage the two clips.

  5. mISEWTwGPP5pEJMA
    mISEWTwGPP5pEJMA
    FHT2yKYLLve4PwvO

    • Flip the top half of the mouse over the right side and use a sturdy object to prop it up, so you can access the battery.

  6. jvOISYhRJBTvZeHQ
    jvOISYhRJBTvZeHQ
    IWqVEJbonrOWftGE

    • Use a Phillips screwdriver to remove the three 4.4 mm‑long screws securing the battery.

  7. KaSrQiJrujw2bstB
    KaSrQiJrujw2bstB
    RQNfwk56IKCPrDSH
    ZOCujGdZKioJ4V3n

    • Use your fingers to lift the battery straight up and remove it.

    • During reassembly, press the battery into place until the connector on the bottom edge clicks into its socket.

Conclusão

Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before you install it.

To reassemble your device, follow these instructions in reverse order.

Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.

Reuse or Recycle—Never put discarded electronic parts in household waste. Visit Logitech Recycling to find your nearest recycling points, including the option to mail back old devices to Logitech for free if there’s no convenient solution in your area. You can also take your e-waste to any R2 or e-Stewards certified recycler. And don’t let good working parts or repaired devices die a slow death in your sock drawer—pass them along to someone who can use them.

Share your experience—Leave a comment here or send your feedback directly to Logitech at repair@logitech.com to help shape future repair guides and product design.

Autor(a)

Spencer Day

Membro desde: 14/09/22

165254 Reputação

0 comentários