Lenovo V15-ADA RAM Replacement

Escrito Por: Jacob Schorr
  • Comentários: 0
Lenovo V15-ADA RAM Replacement

Dificuldade

Easy

Passos

6

Tempo necessário

30 seconds - 1 minute

Introdução

This guide shows how to access and safely disconnect and reconnect the RAM from your device.

  1. Y1nuV61TsLdGZVS5
    Y1nuV61TsLdGZVS5
    JeGFQDyDZMFDth4I

    • Remove the 10 marked screws using a Phillips #1 screwdriver from the back plate.

    • M2.5 × 7 mm, Phillips-head (6) (RED circles)

    • M2.5 × 4 mm, Phillips-head (4) (ORANGE circles)

    • The red circles show the longer screws, and the orange circles show the shorter screws.

    • Keep your screws organized. They’re different lengths and must go back in their original positions.

  2. raWXMOxLK4ORVVmw
    raWXMOxLK4ORVVmw
    tP2ii2LyDa3jAUkr

    • After removing all ten screws, use a plastic spudger to separate the bottom cover from the laptop.

    • Gently slide the tool around the edges until the clips begin to release.

    • Once all the clips are loose, lift the cover off and set it aside.

    • The Wi-Fi card is located near one corner of the motherboard. It has two antenna wires connected to it (one black and one gray).

  3. biEQMF4w4ncq5mJj

    • Push the clamps holding the RAM card in place back.

  4. LWGqZrO1lh35lfLh

    • Lift out RAM card.

  5. WdCtTHOxA2BcpbpL

    • Pull RAM card out.

  6. DXpbKnGPGGaL6xpF

    • After completing steps 5-7, the RAM is successfully removed.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

Jacob Schorr

Membro desde: 21/02/24

442 Reputação

0 comentários