Introdução
Ferramentas
-
-
Using a T4 Torx screwdriver, remove the screws that secure the lower case:
-
Six 2.5 mm screws
-
Four 5 mm screws
-
Insert a spudger into the seam between the lower case and chassis.
-
Pry around the entire perimeter until the lower case fully releases.
-
-
-
Using a Phillips #00 screwdriver, remove seven 4 mm screws from the cooling assembly.
-
Carefully lift the cooling assembly off of the motherboard.
-
Conclusão
To reassemble your device, follow these instructions in reverse order.
