Introdução

Use this guide to replace the USB board on a Lenovo 500e Chromebook 81ES.

  1. Fn2nXWaxEsoRWOeR
    • Use a Phillips #0 screwdriver to remove the ten 4 mm-long screws that secure the lower case.

  2. BMA4kyyEbpFQFNlF
    BMA4kyyEbpFQFNlF
    E4bUYlvUYlOrGkBi
    • Insert the flat end of a spudger into the seam between the lower case and chassis.

    • Pry around the entire perimeter until the lower case fully releases.

    • Remove the lower case.

  3. T2BMRQCTQeB5oB2K
    T2BMRQCTQeB5oB2K
    TmZwNslLMHBIByKH
    • Use a Phillips #0 screwdriver to remove the four 4 mm-long screws that secure the metal bracket over the USB board.

  4. adFdI2YfmecjLuVy
    adFdI2YfmecjLuVy
    VuuSlMp4HgAkvIri
    • Remove the bracket.

  5. 5laqbJgaNRXPCcNl
    5laqbJgaNRXPCcNl
    BR4RGo6XqDfeKnhB
    • Use the flat end of a spudger to flip up the two ZIF locking flaps on the USB board.

    • Disconnect the ribbon cables.

  6. hHPCQAUwmyEKU1P1
    hHPCQAUwmyEKU1P1
    FqWIE6Rcpd1DS3si
    • Use a Phillips #0 screwdriver to remove the 2 mm-long screw that secures the USB board.

  7. s1BhWpGRGPUKTVEj
    s1BhWpGRGPUKTVEj
    XeZH5XfdcsUYbXgN
    • Lift the USB board up and out the chassis.

Conclusão

To reassemble your device, follow the above steps in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting or ask our Answers community for help.

Connor Bassolino

Membro desde: 29/03/22

21106 Reputação

0 comentários