LG 1010 Front Cover Replacement

Escrito Por: Nicholas Schmidt
  • Comentários: 0
LG 1010 Front Cover Replacement

Dificuldade

Moderate

Passos

6

Tempo necessário

5 - 10 minutes

Introdução

  1. dKxwKAVxvRFfXrCt
    dKxwKAVxvRFfXrCt
    VYQaehf4nWAcZi3n

    • Use a Spudger to remove the two front plastic covers to reveal screws.

  2. J5H2EOg11CvND4af

    • Remove two screws using a Torx T6 screwdriver.

  3. hHaFQRQhPIfElqE1
    hHaFQRQhPIfElqE1
    ypdSZK4kUaNX2NTV

    • Pry off the screen front cover with a small flathead screwdriver.

  4. cRkRrTbDwKL2qYQv

    • Insert a small flathead screwdriver into the hinge and separate hinge connection.

  5. iTraHFqwYZLBdqZR

    • Pry off the speaker which is glued on to the front cover using a small flathead screwdriver.

  6. 1e4xGhGoFK3jQZQL

    • Remove remaining portion of the front case from the flexible circuit board.

    • Do not attempt to remove the LCD board at this time, as it is attached to the rear panel assembly.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

Nicholas Schmidt

Membro desde: 09/10/10

97 Reputação

0 comentários