Kodak EasyShare C913 Front Case Replacement

Escrito Por: Dustin Rodgers
  • Comentários: 1
Kodak EasyShare C913 Front Case Replacement

Dificuldade

Easy

Passos

4

Tempo necessário

10 - 20 minutes

Introdução

Use this guide to remove and install the front case on your Kodak EasyShare C913 camera. Before you begin, make sure to remove the battery and unplug from the charger.

  1. HTMAhkS4RfXfLBgS
    HTMAhkS4RfXfLBgS
    EuF4iL5paOFigtmt
    GlpgkGRXcwJi2xun

    • Position the camera with the bottom facing up.

    • Slide the battery cover in the direction of the arrow with your finger gently.

    • Remove the batteries

  2. 6LIqgUDboJnmEo3R
    6LIqgUDboJnmEo3R
    bOorRJgxPHvXRgQB
    bvMAJHIgMl5dMXKH

    • Remove the seven 4.5mm screws with a Phillips #00 screwdriver.

    • 2 screws on the left, 2 screws on the right, 3 screws on the bottom

  3. SxXyAH3qX2WtCWhh
    SxXyAH3qX2WtCWhh
    IaStNm4kjUjDwxvo
    2VuA5FPQnlSRtrRp

    • Firmly grasp the back of the camera and pull the casing away.

  4. SakkFYWG1gNxc21C
    SakkFYWG1gNxc21C
    HTE45rESN1DvUA46
    2q6cXrwYMKT5nRXJ

    • Keep the battery door open

    • Firmly grasp the front casing and pull it away from the camera.

Conclusão

To reassemble your device, follow these instructions in reverse order. Take your e-waste to an R2 or e-Stewards certified recycler.

Autor(a)

Dustin Rodgers

Membro desde: 05/10/10

89 Reputação

Um comentário

Preciso da tampa da bateria...

Tony Rocha -