Introdução
Switching the keycaps and key switches on your Kemove K98 SE is one of the easiest and most effective ways to customize the appearance, feel, and typing experience of your keyboard. Whether you are applying a new keycap set, cleaning underneath the keys, or replacing broken switches, the process is easy and safe if done carefully.
All you need is a keycap puller, a switch puller, and a little patience to remove each keycap and each switch without damaging the sockets or the board.
Before you begin, make sure the keyboard is disconnected from your computer or the charging adapter.
Ferramentas
Peças
-
-
Unplug your keyboard from power outlet and/or your computer.
-
Line up your key cap puller to the key you want to replace and press down lightly till it doesn't move.
-
-
-
Align the switch puller vertically around the switch.
-
Squeeze the switch puller gently and pull the switch out.
-
-
-
Align the new switch so its plugs match the corresponding plugs on the board.
-
Gently push it down.
-
-
-
Repeat the steps 2-5 for any other keys you want to replace.
-
Gently wipe your keyboard with the cloth to clean the keyboard.
-
Once you've installed all the new keycaps into place, you should inspect to make sure each key is level and not contacting its neighbors. Reconnect the keyboard, and test each key to ensure your new keycaps fit and feel as nice as you hope. With your new keycaps installed, your Kemove K98 SE is ready to be used as however you want.
