Juki DDL-8700 Presser Foot Replacement

Escrito Por: Ada Lee
  • Comentários: 0
Juki DDL-8700 Presser Foot Replacement

Dificuldade

Easy

Passos

5

Tempo necessário

5 minutes

Introdução

The presser foot is one of the most important parts of the sewing machine. This guide shows you how to replace different presser feet on the Juki DDL-8700.

  1. MuhOWDtrEgVN21Ak

    • Make sure to turn off the machine before replacing the presser foot.

    • Unthread the needle.

  2. 2EAPKVQMfBYOKVSB
    2EAPKVQMfBYOKVSB
    XEOSqExdGKDvVAuL
    3fOcXE3OeikZwlSX

    • Roll the hand wheel on the right side of the machine to raise the needle up.

  3. UNfwuVdjKYQxW5aJ
    UNfwuVdjKYQxW5aJ
    FOMRZOlqRwKN22t6

    • Pull up the switch to raise the presser foot.

  4. 1aGtBl1cxXnUx3NT
    1aGtBl1cxXnUx3NT
    ooL2MpktdQgbFoLY
    3HSDGUHluhZPLdXk

    • Use a screwdriver to disassemble the presser foot.

  5. GRMrYJEdbGPZlliG
    GRMrYJEdbGPZlliG
    Anb1KHRs4Bjq5ypI
    M51JAFJyJf3vQDcu

    • Use the screwdriver to assemble the new presser foot.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

Ada Lee

Membro desde: 28/04/17

137 Reputação

0 comentários