Introdução
With this Fast Fix you will learn how to wind an empty bobbin with thread and replace the bobbin in the JUKI DDL-8700 High-Speed Single Needle Straight Lockstitch Industrial Sewing Machine. This user-friendly guide ensures a quick and easy process, allowing you to continue your sewing project stress-free.
In the sewing process, the bobbin plays a vital role by supplying the essential bottom thread. While the procedure becomes straightforward with practice, it may pose challenges for beginners, but this guide will help make that learning process easier.
Ferramentas
Peças
-
-
Place the spool of thread on the dual thread stand.
-
Take the loose end of the thread and guide it through the center hole of the dual thread stand.
-
Pull the loose end of the thread through the hole, to the front.
-
-
-
Holding the loose end, guide the thread through the hole near the top of the winder disk.
-
Pull the thread between the winder disks in a clockwise direction.
-
Guide the thread through any hole on the side of the bobbin.
-
-
-
Hold the thread for a few seconds while gently pressing the pedal down.
-
Continue winding the bobbin until the desired amount or until the bobbin releases.
-
-
-
Cut the thread.
-
Pull the bobbin winder lever towards you to release it.
-
Slide the bobbin off of the bobbin winder.
-
-
-
Place bobbin into bobbin case.
-
Pull the thread into the slit on the side of the bobbin.
-
Guide the thread under the notch on the side of the case.
-
-
-
Lift the arm of the bobbin case.
-
Place the bobbin case into the machine with the opening at the top.
-
Release the arm when the bobbin case is in place.
-
-
-
Hold the thread while making a full rotation with the hand wheel.
-
Retrieve the bobbin from the bottom of the machine.
-
At this point, your bobbin should be threaded and replaced. You can now return to your sewing project.
