Jabra Freeway Front Panel Replacement

Escrito Por: Allen Fratalia

Comentários: 2

Dificuldade

Moderate

Passos

Tempo necessário

5 - 15 minutes

Introdução

Ferramentas

Passo 1

Turn off the device before proceeding. Failure to do so may result in device damage or injury to oneself.
Remove the rubber pads from the bottom of the device using the spudger.
Remove the foam tape covering 2 hidden screws from the back of the device.

Passo 2

Remove the eight 6mm T9 screws.
Two of these screws are underneath the foam padding. This padding is glued on and will be destroyed in this process. Poking through the foam minimizes the damage to the device.

Why not show us which 2 are under the foam padding?

Doug -

Passo 3

Gently lift the front panel off of the device and carefully rest it to the side.

The 2 smaller speakers were stuck to the front panel for me. I was able to un-stick them by gently prying with the spudger.

The larger central speaker is stuck to the front panel with a foam double-sided adhesive. I pried this off with the spudger as well in order to completely remove the front panel. (I'll have to replace the foam adhesive with tesa tape or something... Or not bother.

Bork'd Doodads -