Inter-tel IP 8660 Handset Microphone and Receiver Replacement

Escrito Por: Juan David GutierrezFranco
  • Comentários: 0
Inter-tel IP 8660 Handset Microphone and Receiver Replacement

Dificuldade

Moderate

Passos

6

Tempo necessário

10 - 15 minutes

Introdução

  1. FW5ybcGFqVBmfGLZ

    • Disconnect the phone cord from the handset jack.

  2. Ivyd4oNTP3ZsCsBC
    Ivyd4oNTP3ZsCsBC
    lFfvS4i1YleBRAZv

    • Unscrew the two black screws (8 mm long) located in the middle of the handset using #1 Phillips head.

  3. 11iXVKkrrZqsWGqA
    11iXVKkrrZqsWGqA
    2PvEN2MM2OJhKpgH

    • Pry the back cover off the headset using a spudger. It is best to pry at the top of the handset.

  4. SDYXSXBkULEdkhUJ

    • While holding the handset front cover, grasp and twist the handset microphone and jack until they come free from the cover.

  5. PVtijdElCoZEW42O
    PVtijdElCoZEW42O
    Y5GSSNHYA6lNGToA
    nLQvlpxaxICkPq35

    • Unscrew the 2 screws (8 mm long) that hold the receiver in place using a #1 Phillips screwdriver.

    • The screws come with washers.

  6. QQvMgpc1TWCMCiZ4
    QQvMgpc1TWCMCiZ4
    1XWlP3SaNQdD1Wpq

    • Pull the red and green wires that connect the receiver to the microphone out from under the metal piece and black padding.

    • To insert the wires back underneath the black padding, pull the black padding back with your finger and use plastic opening tool to wedge the wires underneath the black padding.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

Juan David GutierrezFranco

Membro desde: 20/01/12

67 Reputação

0 comentários