India Mark III Access Door Replacement

Escrito Por: Andrew Optimus Goldheart
  • Comentários: 0
India Mark III Access Door Replacement

Dificuldade

Moderate

Passos

3

Tempo necessário

No estimate

Introdução

Follow this guide to remove and replace, repair, or clean the access door.

Ferramentas

  1. knxaBegnqXhMVOJP
    knxaBegnqXhMVOJP
    6FLXjZRrK3VCdh52

    • Before performing any repairs, perform a water test on the pump by raising and lowering the handle a full 40 strokes. A properly performing pump will yield greater than 10 liters.

    • Remove the hex head bolt from the top of the access door on the pump head.

    • On reassembly, this bolt should be hand-tight.

  2. kc2lU4ebqKFBw1qN
    kc2lU4ebqKFBw1qN
    RnQHnIhOOpsDGOxf
    xOfQglAwmagVWqOA

    • Pull the access door straight up off the pump head.

    • Store the access door in a sanitary place to prevent contamination.

  3. JoFFylEdtWmtoaVd
    JoFFylEdtWmtoaVd
    EWeXySTTDWTlrIdC

    • The access door has a tongue that fits into the base of the pump head.

    • The access door makes a convenient tray to hold nuts and bolts during the disassembly.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

Andrew Optimus Goldheart

Membro desde: 17/10/09

513614 Reputação

0 comentários