India Mark II Riser Main Coupling Replacement

Escrito Por: Andrew Optimus Goldheart
  • Comentários: 0
India Mark II Riser Main Coupling Replacement

Dificuldade

Moderate

Passos

4

Tempo necessário

No estimate

Introdução

Prereq only.

  1. C2gdyBEHmGg4VdYF
    C2gdyBEHmGg4VdYF
    GGwAhg1kDvXALLr5

    • Place a coupling over the pump rod, on top of the rod vise.

  2. eXQLh5H2CkEMLVH1
    eXQLh5H2CkEMLVH1
    a6gPoVfkTqgZU2yO
    wCibYBuieBTvagiP

    • Reattach the T-handle to the top of the pump rod.

  3. nCtnRckHvaZJSmFJ
    nCtnRckHvaZJSmFJ
    OuMqDgJH6LEQgVUy
    FFrNIlRjc5CVT2fF

    • Loosen and remove the rod vise from the pump rod.

    • The coupling will drop down onto the riser main.

  4. GOsbrClpKS6qWJYE
    GOsbrClpKS6qWJYE
    MD3UOjOoJRimQOIK

    • Screw the coupling onto the end of the riser main.

    • Use a pipe wrench to tighten the coupling onto the riser main.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

Andrew Optimus Goldheart

Membro desde: 17/10/09

513614 Reputação

0 comentários