Introdução
Follow this guide to open your Logitech K295 wireless keyboard.
Opening your keyboard gives you access to clean its internals, troubleshoot mechanical problems, or replace a part.
-
-
Slide the power switch to the OFF position.
-
Flip your keyboard over and lay it down so the edge with the two tilt legs is closest to you.
-
-
-
Use your finger to lift the edge of the first battery and remove it.
-
Slide the second battery out of its recess and remove it.
-
-
-
Use a Phillips screwdriver to remove the fifteen 8.8 mm‑long screws securing the keyboard together.
-
-
-
Insert the long edge of an opening pick in the seam between the two halves of the keyboard, by the bottom of the left edge.
-
Pry up the top half of the keyboard to release the clip.
-
Leave the pick inserted for the next step.
-
-
-
With the pick angled flat to the keyboard, slide it along the left edge to release the clips securing the two halves.
-
-
-
Gently hold the two halves of the keyboard together and flip it over so the bottom is facing up.
-
To reassemble your device, follow these instructions in reverse order.
Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.
Reuse or Recycle—Never put discarded electronic parts in household waste. Visit Logitech Recycling to find your nearest recycling points, including the option to mail back old devices to Logitech for free if there’s no convenient solution in your area. You can also take your e-waste to any R2 or e-Stewards certified recycler. And don’t let good working parts or repaired devices die a slow death in your sock drawer—pass them along to someone who can use them.
Share your experience—Leave a comment here or send your feedback directly to Logitech at repair@logitech.com to help shape future repair guides and product design.
