How to Install Shoulder Buttons in Your Game Boy Advance SP

Escrito Por: Spencer Day
  • Comentários: 1
How to Install Shoulder Buttons in Your Game Boy Advance SP

Dificuldade

Moderate

Passos

5

Tempo necessário

5 - 10 minutes

Introdução

This guide shows you how to install the shoulder buttons (L + R) in the bottom shell of your Nintendo Game Boy Advance SP.

  1. ZrWFBiilHW4wuNf5
    ZrWFBiilHW4wuNf5
    eIbFG2B5TIUwBMOj

    • If the hinge pin fell out when removing the shoulder button, put it back into place.

  2. 4MfWItFwOgpMCLIU
    4MfWItFwOgpMCLIU
    gLUdsDwgX4QAAATg
    6ikJK6tJFVXqEeVs

    • The two springs are not interchangeable. It should be clear if you're trying to install the wrong spring, as it won't fit correctly in the button.

    • Slide the spring into the shoulder button so the bent arm goes into the cutout on the inside edge.

  3. a24UMwAQFOqVQRVg
    a24UMwAQFOqVQRVg
    kRaGkZBwwtXdAeGd
    tBLhXBJfst3UQhMJ

    • When installing the button, make sure it's oriented so the spring's straight arm is on top.

    • Use your fingers to hold the spring in place and slide the button over the hinge pin and into its recess.

  4. vgIwM3KdCynWUIPG
    vgIwM3KdCynWUIPG
    ZPhSM33LgdPCALDV

    • Use your finger, a spudger, or a pair of tweezers to rotate the spring arm into its clip.

  5. Cfg1KtP3362UtgE3
    Cfg1KtP3362UtgE3
    OaBlKjL1luVVtGcX
    5rRMGcKewEsQbSlt

    • Repeat the process to install the other shoulder button.

Conclusão

Return to your original repair guide and continue with reassembly.

Autor(a)

Spencer Day

Membro desde: 14/09/22

165254 Reputação

Um comentário

Thanks for adding this small guide, linked from the 'How to Reshell' guide. The springs of my shoulder buttons fell out during disassembly and this made it so much easier and less stressful, knowing I was doing it right. Everything works perfect again, including a stuck button (I had to replace the rubber pad)

CircuitBenT -