Introdução
Over time, debris like lint, coins, and fabric fibers can clog the filter in your GE 24" Front-Loading washing machine, leading to poor drainage and potential damage. This guide will walk you through the safe and simple steps to locate, remove, clean, and replace the filter. No advanced skills are required, and the process should take less than 30 minutes.
Ferramentas
-
-
Place a towel underneath the panel.
-
Slip the spudger into the panel and apply light pressure to pop open the panel.
-
-
-
Twist the filter knob counterclockwise to release it.
-
Allow water to drain fully into container or rags.
-
-
-
From there, clean the filter under warm running water.
-
Use an old toothbrush if needed to remove any stubborn build up.
-
-
-
Wipe down the area inside the filter housing.
-
Insert the cleaned filter back into the housing.
-
Twist clockwise until secured—do not overtighten.
-
