Introdução

If your Hoover Air Lite Upright Vacuum Cleaner (Model UH72460) has stopped picking up debris, is making a burning smell, or the brush roll has stopped spinning, this guide will help you replace the brush-roll drive belt. Many users assume their Air Lite is broken beyond repair, but in most cases, a worn or broken belt or a clogged brush roll causes the vacuum to lose suction or stop agitating carpet. This repair does not require any special skills, only basic hand tools, but you should always unplug the vacuum before opening the brush-roll compartment. The Air Lite does not contain a user-serviceable battery, and there are no capacitors in this section of the machine, so the risk is minimal. However, be cautious of sharp debris lodged around the brush roll and properly dispose of any broken belt pieces.

  1. YXm3WUFTFZtvLpmJ
    YXm3WUFTFZtvLpmJ
    w4KqXkGtunqYEVMF
    • Unplug the vacuum for safety. Turn the vacuum over so you can see the bottom.

    • Remove the single screw from the bottom of the vacuum using a Phillips #00 screwdriver.

    • Release the two green clips to remove the plate covering the brush roll.

  2. AS6EOII6hfkXC4Cw
    AS6EOII6hfkXC4Cw
    dfVNatGqZwHNF22f
    43xwJsOARJZSDpa5
    • Remove the brush roll.

  3. SXD3SXvspkttmpOP
    SXD3SXvspkttmpOP
    NStG215LQrNPBhVZ
    • Remove the old belt with needle nose pliers.

  4. 5EYQIyco2yjiTSfr
    5EYQIyco2yjiTSfr
    NProZKVlIJLWt1Qx
    • Loop the new belt around the motor shaft and also the brush roll.

  5. rGdmnBu1BSCOEJ44
    rGdmnBu1BSCOEJ44
    dRwlprLPeGM3bK5O
    • Reinstall the brush roll, and ensure the belt is straight.

    • Then use the plate cover to cover up the roll brush afterwards.

  6. rllvQ1tPEQAhkhGD
    rllvQ1tPEQAhkhGD
    4WrCGWQYCpBwDiLK
    • Reattach the plate cover, using the green hooks to hold the plate in place.

    • Secure the screw to reattach the plate.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Edwin Gonzalez

Membro desde: 30/09/25

133 Reputação

0 comentários