Hamilton Beach 51101BA Blades Replacement

Escrito Por: Brandon Nunez
  • Comentários: 7
Hamilton Beach 51101BA Blades Replacement

Dificuldade

Easy

Passos

4

Tempo necessário

2 minutes

Introdução

After using this guide you will learn how to replace the blades in your blender. You will need to use basic tools to complete this guide.

  1. JTFqgS1rVoSULOws

    • Remove the lid from the container by holding the base and pulling up on the lid.

  2. rCSHslEGxvYNq3ZV
    rCSHslEGxvYNq3ZV
    BNRrTAWeBYcmm3vZ
    eODKURjeNYvmSjQn

    • Remove the container from the blender.

    • Hold the blender and the container, then twist the container in a clockwise motion.

    • Make sure to follow the lock and unlock markings on the container.

  3. mQ4ouRk5ynQODNIy
    mQ4ouRk5ynQODNIy
    12GpaVh3GcVRIMN6
    CFkdgTMkwiNLUbAL

    • Avoid placing your fingers on the blade, as they could be sharp.

    • Using a pair of pliers to hold the blade in place, use your other hand to unscrew the rubber piece on the bottom of the container.

    • Remove the rubber piece and the two washers by rotating the rubber piece counter-clockwise.

  4. sLaprrrPLG3O2cjH

    • Carefully, pull the blades out of the container as they are very sharp.

    • Using the pliers, remove blades and the washer around the blade shaft.

    Dear Brandon, thank you for that guide. Please, do you know where I can find the spare blades for replacement? Thank you and all the best.

    Patricia (Brazil)

    Patrícia Garcia -

    Thanks! It seems really gross that the blade isn't easily removed for cleaning :)

    ice-lady -

    In my blender, the whole blade assembly, including the base where the blade sits, got dislodged. This makes the content leaks to the bottom like a water falls. How to repair it?

    Joy A. Aquino -

    I want to know how you remove that plastic base that the blade is taken out of because between the bottom of that plastic base and the actual plastic of the cup there's mold growing in it

    Clay B. -

Conclusão

To reassemble your device with the new blade assembly, follow these instructions in reverse order.

Autor(a)

Brandon Nunez

Membro desde: 28/08/15

301 Reputação

3 comentários

Need to know how to install parts and how many

papi3701@aol.com -

Looks like I missed parts need to know the order son cuantaty

papi3701@aol.com -

For my 501101B blender, the whole blade assembly popped out, so the blended smoothie draws at the bottom like a water falls How to fix this?

Joyful Joy -