HP Stream 8 Display Panel Cable Replacement

Escrito Por: Ashley Eimers
  • Comentários: 0
HP Stream 8 Display Panel Cable Replacement

Dificuldade

Easy

Passos

7

Tempo necessário

7 minutes

Introdução

The guide details how to replace the display panel cable. The cable is important for the communication throughout the HP Stream 8.

  1. EmvJGidvMOESDVYr

    • Use your nail to pry up the back cover of the device.

  2. dlSiSpf1cEThaDhc

    • Fully remove the back cover.

  3. 23J5tNpaS5HeqvM4
    23J5tNpaS5HeqvM4
    bNHNDZNZavZn54PR
    EFUtHEjvAuW6aCIr

    • Remove the 10 3mm screws using the Phillips #00 screwdriver.

  4. FcAGZdPpRnsZc3SE
    FcAGZdPpRnsZc3SE
    kFLomDGYVcwTdBXW

    • Pry up the inside cover the same way as you did with the back cover.

  5. BsHSLOcmPVTlINUk

    • Remove the USB flex ribbon cable from the connection point.

  6. IRqKO5kIsPptGjfX
    IRqKO5kIsPptGjfX
    Q4JfnWTN45NUZW3t

    • Carefully disconnect the display panel cable from the system board.

  7. Xowyjd1SKWbm4Bxs

    • Remove the display panel cable.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

Ashley Eimers

Membro desde: 01/04/19

265 Reputação

0 comentários