HP EliteBook 725 G3 Lower Case Replacement

Escrito Por: Connor Bassolino
  • Comentários: 0
HP EliteBook 725 G3 Lower Case Replacement

Dificuldade

Easy

Passos

3

Tempo necessário

5 minutes

Introdução

Use this guide to replace the lower case on a HP EliteBook 725 G3.

  1. CwfNHdLbI4odWRke
    CwfNHdLbI4odWRke
    SYi4LOwgZlWYAwnl

    • Remove the ten 2.5 mm-long Phillips #0 screws securing the lower case.

  2. DGMaXftLCUejKHMW
    DGMaXftLCUejKHMW
    m14oO2wZZ2E2kVLK

    • Use the pointed tip of a spudger to remove the rubber stoppers on the lower case.

  3. ZDlADxyBYVxSHfAg
    ZDlADxyBYVxSHfAg
    WJORd1NL5OfQM454
    CGi4OywFRrUisGNC

    • Remove the remaining 2.5 mm-long Phillips screws that secure the lower case.

    • There should be 11 total 2.5 mm-long Phillips #0 screws when you're done.

    • Thelower has a click-release mechanism that is shown in the photos where the SD card is inserted.

    • Push in on this mechanism and remove the lower case.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

Connor Bassolino

Membro desde: 29/03/22

21106 Reputação

0 comentários