Introdução
Use this guide to replace the capacitor assembly in your Gourmia GMF600. This guide covers replacement of the entire capacitor assembly and does not include individual capacitor replacement. This guide has important background information about capacitors.
While this repair is fairly straightforward, take care when working near electrical components. Disconnect connectors gently to avoid damaging cables or causing a short circuit.
Caution: Capacitors can store a hazardous electrical charge even after the appliance has been unplugged. Avoid touching exposed terminals and handle the assembly with extreme caution. Wear safety gloves and glasses if possible. Use a resistor to discharge any residual power from the capacitors. This article provides basic information about capacitors.
Before you begin, unplug the refrigerator from the wall outlet.
Optional: To reduce the risk of electrostatic discharge (ESD), work on a nonconductive surface and ground yourself before handling internal components.
Ferramentas
-
-
Orient the device so the back is facing you.
-
Use a Phillips #1 screwdriver to remove the six screws securing the back panel to the device.
-
-
-
Carefully disconnect each cable connecting the capacitor assembly to the main board.
-
Disconnect the black wire and then the red wire.
-
-
-
Use a Phillips #1 screwdriver to remove the two screws securing the capacitor assembly to the device.
-
Gently lift it from the device.
-
To reassemble your device, follow these instructions in reverse order. Take your e-waste to an R2 or e-Stewards certified recycler.
