Google Pixel Buds 2a Bottom Shell Replacement

Escrito Por: Spencer Day
  • Comentários: 0
Google Pixel Buds 2a Bottom Shell Replacement

Dificuldade

Moderate

Passos

4

Tempo necessário

5 minutes

Introdução

This repair guide was authored by the iFixit staff and hasn’t been endorsed by Google. Learn more about our repair guides here.

Follow this guide to replace the bottom shell on the charging case for your Google Pixel Buds 2a headphones.

  1. wwkjcOgwYpHgQWOZ

    • Before starting your repair, unplug your charging case.

  2. gaouKONcgnQYZlQK
    gaouKONcgnQYZlQK
    JNaGFIIJtp3GFsJH
    mPKD2TSgJgApkJcw

    • Open the case lid, remove the Pixel Buds, and set them aside.

  3. DYE2YwdQHxNEaB5X
    DYE2YwdQHxNEaB5X
    XAsTdDisLesLRYBO
    fcsOCFSdVJZHx4Mn

    • Use a T5 Torx screwdriver to remove the two 6.2 mm‑long screws from the ear bud recesses.

    • You may need to flip the case over and gently shake it to get the screws to fall out.

  4. FSV2OEWmIZJ2oTnK
    FSV2OEWmIZJ2oTnK
    LIWRrBV5rICAFXQV
    YAhWyQso1khBW65T

    • Slide the main body of the charging case completely out of the bottom shell, inserting a fingernail in the seam near the top of the case to create an initial gap.

    • If you're having trouble, use the flat end of a spudger to start the initial gap.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.

Autor(a)

Spencer Day

Membro desde: 14/09/22

165254 Reputação

0 comentários