Google Pixel 10 Pro Fold Outer Screen Adhesive Installation

Use a spudger, or your fingers, to remove the old outer screen adhesive on the frame.

Use isopropyl alcohol (>90%) and a coffee filter or a microfiber cloth to remove any adhesive residue.

Repeat the previous step for the adhesive on the outer screen.

Before removing any liners, check if the outer screen adhesive matches the frame.

Peel away the top half of the new adhesive strip from its clear liner and keep the liner folded before continuing.

Align the top half of the adhesive over the frame, using the corners as reference points.

Place the adhesive on the frame.

Use the flat end of a spudger, or your fingers, to press down the top edge of the adhesive and adhere it to the frame.

While peeling away the rest of the clear liner, slowly lay the adhesive over the perimeter of the phone.

Use the flat end of a spudger, or your fingers, to press down the rest of the adhesive and adhere it to the frame.

Use the point of a spudger to pry up the segmented tab on the bottom edge of the large blue liner.

Lift the tab and peel off the large blue liner to expose the secondary liner.