Google Pixel 10 Pro Fold Back Glass Adhesive Installation

Use a spudger and tweezers to remove the old back cover adhesive from the frame.

Use isopropyl alcohol (>90%) and a coffee filter or a microfiber cloth to remove any adhesive residue.

Repeat the previous two steps to remove the residue from the back cover.

Before removing any liners, check if the back cover adhesive matches the frame.

Peel away the bottom half of the new adhesive strip from its clear liner and keep it folded before continuing.

Align the bottom half of the adhesive over the frame, using the corners as reference points.

Place the adhesive on the frame.

Use the flat end of a spudger, or your fingers, to press down the bottom edge of the adhesive and adhere it to the frame.

While peeling away the rest of the clear liner, slowly lay the rest of the adhesive over the perimeter of the phone.

Use the flat end of a spudger, or your fingers, to press down the rest of the adhesive and adhere it to the frame.

Use a spudger to pry up the segmented tab on the bottom right corner of the large blue liner.

Lift the tab and peel off the large blue liner to expose the secondary liner.