Gateway SA1 Cooling Fan Replacement

Escrito Por: Diego Carteno
  • Comentários: 2
Gateway SA1 Cooling Fan Replacement

Dificuldade

Easy

Passos

7

Tempo necessário

10 - 15 minutes

Introdução

This guide will help in determining if the cooling fan is broken and how to fix or replace it.

  1. S6lEYvUrYwibbAWp

    • Move the latch to the right of the battery to unlock.

  2. KjtYYqwZCqFtLOIo

    • Slide the latch on the left directly below the battery to unlock and pull out the battery as shown.

    • The latch must be held in position to remove the battery.

  3. CEN251JWIGDLOol6
    CEN251JWIGDLOol6
    Q1RJvixPgoV5rWhA

    • Unscrew the indicated Philips screw.

    • Screw cannot be completely removed from cover.

  4. llFUyfuvqufjFTAE

    • Use the spudger to pry open the cover.

    • There will be three tabs on each side except for the side with the screw.

  5. ybJiCFUVfD46yVmX
    ybJiCFUVfD46yVmX
    f6IdhJkPwZuZbEiY

    • Unscrew the six indicated Philips screws.

    • These screws cannot be completely removed from the cooling fan component.

  6. 5PTGCE1jC4lDR4kp

    • Unplug the shown cable attaching the cooling fan to the computer.

  7. 4BFI2ijF1Cvj6ijI

    • You are now able to remove the cooling fan.

    It looks like you removed the heat sink with the fan, is it possible to remove the fan alone? How are they connected?

    Alex Jansen -

    How do you detach the fan at the #1 screw to switch it out and put a new fan in?

    Leslie Jones -

Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

Diego Carteno

Membro desde: 15/04/10

273 Reputação

0 comentários