Introdução
Needing a speaker replacement on the Garmin Nuvi 1450, use this helpful guide. Before starting, inspect your device to see if it needs a speaker replacement. Make sure to clear away any blockage of the speaker to see if that may be the problem. The audio on the device will be significantly reduced.
The speaker on the Garmin Nuvi 1450 is a crucial component; it provides audio instructions and plays any audio files. The device will become less functional without it.
Check for any visible damage and completely power off the device, and ensure there is no connection to the device. You can then start dismantling the device.
-
-
Remove the battery slowly by using an opening tool to pry the underside of the battery, and use another opening tool as leverage to lift the battery slowly. After some time, you should have the battery free from the frame.
-
-
-
Remove the tape covering the two 3.25 mm-long screws on the motherboard using your hands or Tweezers.
-
Remove the two 3.2 mm-long screws with a T4 Torx screwdriver.
-
-
-
Use a Bit Driver and a 2.5mm Flat Bit to remove the speaker wire connecting to the motherboard, and then remove the motherboard you plan to replace.
-
To reassemble your device, follow the above steps in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting or ask our Answers community for help.
