Garmin Nuvi 1390LMT Logic Board Replacement

Escrito Por: Trey Ulsh
  • Comentários: 2
Garmin Nuvi 1390LMT Logic Board Replacement

Dificuldade

Moderate

Passos

7

Tempo necessário

15 - 35 minutes

Introdução

This guide will show you how to disassemble the Garmin Nuvi 1390LMT GPS to replace the logic board.

  1. LTaMOyje3gOP24PT

    • Snap the plastic cover off using a plastic opening tool.

  2. TJjeqqFSt3AslST1
    TJjeqqFSt3AslST1
    WAVqDceDw2cykTeF

    • Remove the four black 11 mm T5 torx screws.

  3. pAV1ETN1tyCguljh

    • Pop the screen cover off with a plastic opening tool.

  4. vlvx56Oy5Ky1OU43

    • Gently pull the wire ribbon connecting the screen to the logic board from the plug.

    • Be careful when unplugging the wire ribbon. It is very fragile.

  5. M6cUqegc3hJwD6TW

    • Remove the two silver 5 mm T5 torx screws connecting the circuit board to the plastic casing.

  6. RbMPjNFlXGwpSWRC

    • Flip the logic board over.

  7. X3N6IULK6FbKtwWh
    X3N6IULK6FbKtwWh
    Fi5K22KUpfSMgghB

    • Disconnect the harness between the battery and the logic board.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

Trey Ulsh

Membro desde: 22/10/15

537 Reputação

2 comentários

I need a replacement board for My Garmin Nuvi 1490LMT - where can I get one?

Danny -

How many pins is this logic board for that exact logic board display scren

Shawn Pearson -