Garmin Edge 830 Touch Display

Escrito Por: Samantha Klopman
  • Comentários: 3
Garmin Edge 830 Touch Display

Dificuldade

Moderate

Passos

3

Tempo necessário

20 minutes

Introdução

If you find yourself on this guide, it means your screen is frozen, unresponsive or has shut down. In that case, it might be time to replace your screen. With the 3 easy steps listed on this guide, you will have that done in no time! The best part about this step is that you don't need to keep track of any tiny screws. You are simply focusing on softening that glue to remove the screen.

  1. CXOFEKNEmENaAPIf

    • Microwave the iOpener for about 30 seconds. Then place it on top of the screen, and let it sit for about 2 minutes.

    • Repeat this process a second to ensure that the glue is becoming loose.

    • Alternative: Use a heat gun or hair dryer to heat up the glue

    I have a 820 is the same process used?

    Gary Roy Hogg -

  2. lmcgVSCTMVOVOyPk

    • Use the Jimmy tool carve around the edges of the screen to break the glue seal.

    Does the glue have to be replaced? If so what type of glue?

    Gary Roy Hogg -

    Some clarification/assistance with the reassembly would be helpful. As mentioned above, a description of type of glue recommended to reattach the screen, and later an adhesive suggestion for reinstalling the battery as well as a source for both.

    jbrines -

  3. WqXONU5VpX1YiLWZ

    • Use the iFixit plastic opening tool to pry open the screen.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

Samantha Klopman

Membro desde: 21/03/22

293 Reputação

0 comentários