Introdução

Your Garmin (Model Number: 010-01507-03) Dash Cam 35 is a reliable device that captures high-quality video and audio. If your dash cam's video quality has dropped significantly, you may have a damaged lens that needs replacement.

If you see dim or blurry footage, color or exposure problems, or grainy, noisy footage, a lens issue is most likely. A replacement may be necessary if general troubleshooting has not resolved the issue.

Before starting, make sure you turn off the dash cam and unplug it to avoid any electrical hazards. Back up any critical footage beforehand in case of damage.

Be sure to handle the device carefully, as damage can occur if mishandled. Make sure to follow the guide's steps altogether to avoid damage. If done correctly, you can successfully repair the lens on your Garmin Dash Cam 35.

  1. qcTPCBJkOY2xyIIE
    • Remove the two 1.7 mm screws holding the case in using a T6 Torx screwdriver.

  2. BYIrSZTFPO4fHrh1
    • Use opening picks and the opening tool to pry the two pieces of the case apart.

    • Be careful when prying and try not to break anything.

  3. VMk1DmWY5fwbaCRR
    • Carefully pinch the power cable, and slowly remove it from the motherboard slot.

  4. xNrNCLPafFDNbZLl
    • Carefully lift the lock on the motherboard for the ribbon cable. Unslot the ribbon after the lock is undone.

    • Remove the case.

  5. LKvR2JhjZAMU3FWI
    • Remove the six 1.4 mm screws using the Torx T5 screwdriver.

  6. 2qaPUgTImwdQchyO
    2qaPUgTImwdQchyO
    bi2AvRTBGnZpOe3p
    • Lift the motherboard on the side opposite of the latch.

    • Remove the motherboard.

  7. 3FK315mrrZlumm6u
    • Remove the lens from the case.

Conclusão

To reassemble your device, follow these instructions in reverse order.

cboren

Membro desde: 21/10/25

281 Reputação

0 comentários