Fujifilm Instax Mini 70 Shell Replacement

Escrito Por: Jaime Arriaga
  • Comentários: 1
Fujifilm Instax Mini 70 Shell Replacement

Dificuldade

Moderate

Passos

4

Tempo necessário

8 minutes

Introdução

This repair guide will show you how to properly remove the shell of the Fujifilm Instax Mini 70. No special skills required.

  1. G12HP3PfAQNHIDaS
    G12HP3PfAQNHIDaS
    OsylAfIFt5dFE5QE

    • Look at the bottom of the camera and find the four 6 mm Phillips #0 screws and remove them.

  2. rgCRKwNaL5IhqKvL
    rgCRKwNaL5IhqKvL
    mo4rUI4pCOOgylbP
    uKghGjlKmgmwLmNj

    • Use a jimmy to separate the front and back shells. Then, use your hands to gently pull the back shell away from the front until it fully detaches.

    Before this step you must remove the top plastic clips, underneath which there are two more screws. The images show this top and those screws already removed by this step, yet it was not done in the first step.

    Mark Vrablic -

  3. 5pNVWke2XY6IDGa5
    5pNVWke2XY6IDGa5
    OAliRBwNrKJrYD6E

    • At the top of the camera, locate the 8 mm Phillips #0 screw and remove it.

  4. LjYBxocyAIviN3OW
    LjYBxocyAIviN3OW
    RANZfQGy1jZrilKO
    u6kwuOPASVfTMbnk

    • Use your hands to gently pull the front shell off of the camera.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

Jaime Arriaga

Membro desde: 08/09/23

112 Reputação

0 comentários