FujiFilm FinePix A340 Motherboard Replacement

Escrito Por: Cody
  • Comentários: 0
FujiFilm FinePix A340 Motherboard Replacement

Dificuldade

Moderate

Passos

12

Tempo necessário

25 - 50 minutes

Introdução

How to remove and replace the logic board.

  1. Pkt3FmqJAJ4aQLDB

    • To prevent the danger of electric shock, remove the batteries before continuing to the next steps.

    • Slide the battery cover to the side to release the batteries.

  2. vmRqxIHXMXfnccM1
    vmRqxIHXMXfnccM1
    Fgu3NMD2PrESRQSM
    6yWExUFP3GMeI43j

    • Remove the five screws from the camera casing using a tri-point Y0 screwdriver.

  3. fAhbFy25dmJLRN2h
    fAhbFy25dmJLRN2h
    wFY3hhf6RXgwDrsl

    • Grab the case with your hands and slowly pull back the outer casing.

  4. 4ajevGoBgvNcgrMu

    • Locate the LCD screen and anchoring screw.

    • Remove screw.

  5. eQXTqDBGiQWjfHOq

    • Carefully pull the LCD screen away from the board it is connected to.

  6. HwIDHLHKLbqNmSMZ

    • Push both blue switches away from the holding device to detach the LCD ribbon.

    • Be careful when removing the ribbon. If you damage it, you will need to replace it as well.

  7. bMLVTGfgqxoHSQnS

    • Carefully detach the ribbon from where it was connected by the blue pins.

  8. E1BaJJrZ3cESyaiM

    • Now that everything has been disconnected from the board, remove LCD screen.

  9. TBJLP4wWVapldHRS

    • Remove the two screws holding the circuit board down.

  10. xOlWPjj1wryHrk53
    xOlWPjj1wryHrk53
    AiUE5c5F5eGvCGuo

    • Remove the black sticky tape from the circuit board and camera case.

  11. UHUaTvOGPLURWbIY
    UHUaTvOGPLURWbIY
    ZnXU4N4YDBxMCABZ

    • Gently pull the circuit board away from the front side of the camera.

    • Be careful when removing the assembly as to not break any solder leads or damage the lens assembly.

  12. gsOUCxgnKxyFIrus
    gsOUCxgnKxyFIrus
    qMu2OPBj3SLCeYS4

    • Remove the motherboard by pulling it straight away from the assembly.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

Cody

Membro desde: 19/04/10

47 Reputação

0 comentários