Framework Laptop 16" Numpad Installation

Escrito Por: Alex Diaz-Kokaisl
  • Comentários: 0
Framework Laptop 16" Numpad Installation

Dificuldade

Very easy

Passos

1

Tempo necessário

3 - 5 minutes

Introdução

  1. JyccFC2cavJAQkw2
    JyccFC2cavJAQkw2
    UBPFtlfVJwD5MG4C
    qDoJmL3yEaNiGyLv

    • Your Input Module(s) might be different, but the procedure to remove them is the same.

    • Align the top edge of the Input Module with the top edge of the laptop.

    • Lay the Input Module on the laptop and let the magnets pull the keyboard into place

    • Make sure the Input Module is seated properly on its alignment pegs and sits flush with the edges of the laptop.

    • Repeat for any remaining Input Modules.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers Community for help.

Autor(a)

Alex Diaz-Kokaisl

Membro desde: 16/01/22

227430 Reputação

0 comentários