Framework Laptop 12 Mainboard Reset

Escrito Por: Arthur Shi
  • Comentários: 0
Framework Laptop 12 Mainboard Reset

Dificuldade

Moderate

Passos

3

Tempo necessário

No estimate

Introdução

  1. ZwX2nj252ehmUuw4
    ZwX2nj252ehmUuw4
    wyQtP1uXIAuREH6Y

    • Plug the laptop into a power source using any USB-C port.

    • The red status LED near the right Expansion Card slots should blink continuously. If this LED isn't blinking, the laptop isn't receiving power correctly—try another USB-C port.

    • Don't proceed unless the LED is blinking.

  2. WiRDuCVVAuKnJphP
    WiRDuCVVAuKnJphP
    rI2OgsJRsA3WQdsO

    • Locate the chassis open switch to the right of the SSD slot.

    • This switch is a sensor that detects if the Top Cover has been removed. It's a small silver block with a black toggle tab.

  3. R5d3PYkFYHd6COnI
    R5d3PYkFYHd6COnI
    s6jSTr26NvjFDqlr
    UoHCG11AiFlJCttT

    • Use your finger or the flat end of a Framework Screwdriver to press the chassis open switch 10 times:

    • Press and hold the switch down for two seconds.

    • Release the switch and wait for the indicator LED to resume blinking.

    • Repeat the process 10 times total.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

Arthur Shi

Membro desde: 03/01/18

326111 Reputação

0 comentários