Framework Desktop Secondary SSD Removal

Escrito Por: Alex Diaz-Kokaisl
  • Comentários: 0
Framework Desktop Secondary SSD Removal

Dificuldade

Moderate

Passos

5

Tempo necessário

No estimate

Introdução

  1. kftlYnvNmguD4DJE
    kftlYnvNmguD4DJE
    Y1CEwZhdxdYUgobx

    • Lay the left side of the Desktop on your work surface so the underside of the Mainboard is facing upward.

  2. acCbLnLWZ6NAXgeT
    acCbLnLWZ6NAXgeT
    uxXuvBCjqMZa2L4J

    • Use your Framework Desktop Screwdriver to loosen the captive T5 Torx screw securing the SSD.

    • The SSD and its heat spreader will pop up to an angle when its screw is fully loosened.

  3. VuENchQVhfXBUtOY
    VuENchQVhfXBUtOY
    MVWKhM6fSryFU5EY

    • While holding the heat spreader upright, grab the SSD by its edges and pull it out of its socket.

    • Remove the SSD.

  4. 4aSGs3NaffPWm12M
    4aSGs3NaffPWm12M
    iUDl6QiXqKZIIgJl
    UXpGMGBljOKggVCQ

    • If your SSD comes with a pre-installed heat spreader, follow the next two steps. Otherwise skip here.

    • While securing the secondary storage heat spreader with one hand, use your Framework Desktop Screwdriver to remove the 4.5 mm‑long T5 Torx screw securing it.

  5. h1Sq6rqiLMHTVU2e

    • Lift the secondary storage heat spreader out of the Desktop and remove it.

    • Follow the guide normally, making sure to ignore instructions that involve the secondary storage heat spreader.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

Alex Diaz-Kokaisl

Membro desde: 16/01/22

227430 Reputação

0 comentários