Fluke 175 Multimeter Fuse Replacement

Escrito Por: Richard
  • Comentários: 0
Fluke 175 Multimeter Fuse Replacement

Dificuldade

Moderate

Passos

4

Tempo necessário

No estimate

Introdução

This guide provides simple, step-by-step instructions for safely replacing the fuses in your Fluke 175 Multimeter. Keep your multimeter functioning accurately with this easy maintenance tip.

  1. ZZtB6Gfiq3hKZAl5

    • Turn off meter and disconnect test leads.

    • Warning: To prevent possible electrical shock, fire, personal injury, or damage to the product:

    • Remove the test leads and any input signals before replacing the fuse.

    • Use ONLY fuses with the amperage, interrupt, voltage, and speed ratings specified.

    • Replace the battery as soon as the low battery indicator appears.

  2. poUouWxwxgamyN15
    poUouWxwxgamyN15
    LVlQlnfrFmiXEbfm

    • Use a Phillips PH1 driver.

    • Remove the 2 bottom screws by turning counterclockwise.

    • Remove the 2 top screws.

  3. QvIPMN4SOwsjHuIO

    • Carefully remove the front panel from the back section.

    • Do not move control knob while device is open.

  4. VMcJUjDTdtbCArhd
    VMcJUjDTdtbCArhd
    M3RSyPDnDTaKsEdw

    • Remove and replace fuses.

    • F1 Fuse, 440 mA, 1000 V, FAST

    • F2 Fuse, 11 A, 1000V, FAST

Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

Richard

Membro desde: 14/09/25

109 Reputação

0 comentários