Fiat Stop Light Replacement

Escrito Por: Pete Tijerina

Comentários: 3

Dificuldade

Moderate

Passos

Tempo necessário

No estimate

Introdução

This guide will show you how to replace the stop light on a 2013 Fiat 500 Pop. A burned-out stop light can make your vehicle unsafe and lead to a traffic violation, so replacing it promptly ensures your car remains visible and road-legal.

Ferramentas

Peças

Tail Light Bulb

Passo 1

Remove the two 10 mm bolts to the side of the taillight.

comment démonter le morceaux de plastique

Abd El Karim -

Passo 2

Using a pry tool or something flat, carefully get in-between the light and the car and pry the light off.
The light still has cable connections to the car body, so be sure not to rip these during removal.

Passo 3

Remove the burnt out bulb by pulling it out from the panel.

Ciao a tutti,

sapreste dirmi dove posso trovare in rete o la referenza degli agganci femmina fissati alla carrozzeria per favore?

Trovo solo il kit completo del fanale.

Grazie

marco b -

Passo 4

Clip the panel back onto the light and put it back into the frame of the car.
Replace the two bolts with a 10 mm socket.

This particular facelift rear light has a reverse bulb. How is the holder mounted?

Alfie -

Passo 5

Open the hatch door and locate the two screws under the hatch lip. Then, use the 10mm socket and unscrew both top and bottom screws.

Passo 6

Remove the screws by hand. Then, remove plastic casing from the body.

Passo 7

Remove the casing carefully. There is a wire harness that needs to be disconnected. See red line under the wire harness.
Carefully insert a flat head screw driver into the lock lip while simultaneously pulling the harness out of its socket.