Introdução
You might want to remove the latchdoor to get better access to the DC micromotor.
Ferramentas
-
-
These 4 screws are all that holds the latchdoor connected to the body.
-
It also holds the metal that will keep the film cartridge in place. This is a seperate piece that lays underneath the latch.
-
-
-
Make sure that you lay a piece of cloth inside the empty film case, this to prevent loose screws to dissapear in the little hole that is located on the top left side.
-
Conclusão
To reassemble your device, follow these instructions in reverse order. Make sure the hinge-part is underneath the latchdoor, not on top of it!
