Disassembling FujiFilm instax mini 40 Outer shell

Escrito Por: Daniel Czetwertynski
  • Comentários: 2
Disassembling FujiFilm instax mini 40 Outer shell

Dificuldade

Moderate

Passos

7

Tempo necessário

20 minutes

Introdução

  1. tUqhva5odhLmlqRX
    tUqhva5odhLmlqRX
    wSxhA1cAcGEwPaDC
    SfuddYjjjA2QmGmM

    • You will need a screwdriver with a PH0 bit and a Spudger.

    • Take out the film cartridge make sure it is empty before hand as the film is light sensitive.

  2. QPeAuTcL6Ndv4MVc
    QPeAuTcL6Ndv4MVc
    MG46guJXJEWh3tZw
    CIMgYxYvTaYw6XqM

    • Take off the battery cover then with a Spudger, Pry the outer plastic piece off with the notch and unscrew the three screws.

  3. OoDwJKp2awauNKb5
    OoDwJKp2awauNKb5
    LrOslvO1FTAV2ndV
    hJJAeMBHXCNZbXQT

    • Use a Spudger to pry the plastic piece off the other side and unscrew both screws (the other one is out of frame).

    My mini 40 does not seem to have the 2nd screw that is listed as 'out of frame'. The case is definitely staying closed there as if there is a screw.

    What am I missing??

    Thanks for these instructions!

    Bob -

    Solved, there is no 2nd screw on my Mini 40. The case popped open after I applied a little more force.

    Bob -

  4. I2WcUeYDoHBdHI2e

    • Unscrew both screws at the bottom.

  5. NQTtuvuyXrkFOPsa
    NQTtuvuyXrkFOPsa
    sBjgS6xBjSDOoMfB
    nHFFHhkhjRHkOtF4

    • Using a Spudger pry off the plastic piece at the top of the camera. Then unscrew the screw

  6. Use Spudger and pry on seam then pull both peices apart

    • Use Spudger and pry on seam then pull both peices apart

    • DO NOT TOUCH ANY METAL OTHERWISE YOU MIGHT GET SHOCKED

  7. OHoAWXwLMogsurrM
    OHoAWXwLMogsurrM
    NiFfQVKJLqQXSYeF
    PwxhHEcuAp1DsMxE

    • To put back together

    • Put metal piece on (make sure that the metal bent edge is facing you) then put shutter button on ant then case you may need to jiggle the shutter button around so it fits in the hole. Then follow all other steps in reverse.

Conclusão

To reassemble your device, follow these instructions in reverse order. Do not do step seven in reverse.

Autor(a)

Daniel Czetwertynski

Membro desde: 21/03/25

145 Reputação

0 comentários