Detaching the HP Photosmart 2575 All-in-One's control panel

Escrito Por: Axel Karjalainen
  • Comentários: 0
Detaching the HP Photosmart 2575 All-in-One's control panel

Dificuldade

Very easy

Passos

2

Tempo necessário

30 seconds

Introdução

Here's how you can detach the control panel from the HP Photosmart 2575 All-in-One Printer. It's a prerequisite for taking the scanner glass off.

  1. Sfh15jRuPYBCGW6t

    • Remove the control panel faceplate by lifting up at the notch.

  2. xb4GYDcA5SVED6dD

    • Unscrew one T10 screw near the bottom of the control panel

    • Lift the control panel up at the bottom, around 5 mm above the machine and pull the panel towards the front of the machine.

    • Now you have access to the screws below the control panel.

    • Note: I haven't been able to disconnect the flat flexible cable and the JST connector from the PCB.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

Axel Karjalainen

Membro desde: 14/11/25

458 Reputação

0 comentários