Introdução
Ferramentas
-
-
Open the system badge flap over to reveal the screws underneath (marked 1 on the image).
-
Remove the 12 screws that secure the base cover to the computer.
-
Conclusão
To reassemble your device, follow these instructions in reverse order.
Um comentário
could you please add the type of screw used for this tutorial?
According to the owner’s manual at https://www.dell.com/support/manuals/en-..., most of the screws for the base cover are Torx #5 with a couple of Phillips #0 under the badge flap.
KCMax -